Breaks up more.
Takes in more.

The Inventhor 6.2 combines the best of both worlds: All the experience from the DW 3060 series and all the technological innovations of the Inventhor series. The result: a machine concept designed for maximum efficiency with a high degree of suitability for practical use.

Inventhor 6.2

The Inventhor 6.2 sets shredding efficiency standards. Benefit from its unique VarioDirect Drive, highest uptime and simple, flexible operation, right from the first ton. Get to know the successor of the DW 3060 and take advantage of the latest Doppstadt shredder generation for your business!

OUTSTANDING EFFICIENCY

The new Inventhor 6.2 stands for more efficiency, easy handling, good accessibility maximum uptime, due to the VarioDirect Drive system:

high production rates
low fuel consumption
self protection against damage

This is how it achieves unmatched low operating costs – even in case of difficult tasks.

ANYWHERE PERFORMING ANYWHERE

Inventhor 6.2 is perfectly prepared for any challenge in the recycling of a large variety of materials. It covers a wide range of applications in the field of pre-shredding.

configurable shredding system with quickly replaceable teeth
pre-settable processing programs for quick and intuitive operation of up to four different applications
removable hopper extensions for lower loading height
the total volume can be extended to approx. 8 m³ via hopper extensions

RIGHT TO THE POINT

The patented VarioDirect Drive copes with nearly all kinds of shredding tasks with excellent results. It transmits the driving power variably and continuously to the shredding shaft. Therefore, the Inventhor 6.2 combines the flexibility of a hydraulic drive with the efficiency and torque of a direct drives.

flexible rpm adjustment of the shaft independent of the engine rpm
intelligent reaction behaviour in case of overload
efficient self-protection thanks to the automatic stop and reverse of the shaft
dynamic starting behaviour even under full shredding chamber
economical shredding in different material programs

WIDE OPENING COMB FLAP

You can open the comb holder wide. This guarantees you good and, above all, safe access to the shredding chamber. The comb bar with comb teeth can be completely removed. If you are using a second comb bar, you can fit it with new comb teeth in the workshop beforehand. The limiter is simply inserted into the mounting. All together, this significantly reduces your changeover times.

Therefore, the Inventhor 6.2 is the ideal combination partner for robust separation solutions, where the finished product is made in one pass, so only touching the material once.

For more detailed information, please download the current product brochures.

Application
Specials
Benefits
Downloads and Datasheets

Applications

Specials

Doppstadt is consistently continuing its “Smart Solutions” concept with the Inventhor 6.2. The latest generation of slow speed shredders is designed to deliver maximum efficiency during shredding.

For instance, with its unique VarioDirect Drive concept. It leverages Doppstadt’s patented gearbox. This combination of mechanical and hydraulic gears continuously and steplessly transfers the torque to the shredding system. By doing so, the speed of the shredding shaft can be flexibly adapted to the different material throughput, while the drive is very efficient at delivering a high level of performance at a constant speed. As a result, it is also possible to stop and start the shredding process even under load. And in case of blockage, the VarioDirect Drive can automatically switch to reverse mode.

The intuitive operating concept and modular design of the Inventhor 6.2 ensure maximum availability for a wide range of applications. The cutting gap can be easily adjusted at the touch of a button to adapt the shredding result to changing requirements.

On top of that, its material feed system ensures that the shredding process goes smoothly. It boasts a tipping hopper volume of 5 m³, which can be increased up to approx. 8 m³ by using removable hopper extensions. Thanks to the loading width of over 3.3 metres, loading with large wheel loader buckets is also operator-friendly. The hopper can either be loaded and tilted batch-wise or it can be set at a suitable angle such that the material automatically slides into the shredding area.

The Inventhor’s counter comb door, which opens up wide, makes the entire shredding area and engine compartment easy to access. This means that maintenance and switchover procedures can be carried out quickly and safely, decisively increasing the shredder’s uptime.

The machine is distinguished by great flexibility. Different discharge conveyor belt systems can be easily mounted and replaced using the central attachment system. As a result, selectable belt lengths of 4,9 m or 7 m allow for implementing very high discharge heights and steplessly adjustable belt angles.

The Inventhor 6.2 is available as standard with a trailer, semi-trailer or tracked chassis so that it can also be moved automatically as needed.

Benefits

variable, continuous power transmission thanks to our patented VarioDirect Drive concept
high level of flexibility and quick retrofitting thanks to our patented Dopp-Lock® system with bolted tools
operator-friendly loading with wheel loader or excavator possible as well as removable hopper extensions for a lower loading height
moderate operating costs, high machine uptime
outstanding capacity even with demanding applications and maximum throughput rates
optionally available engine types (CAT / MTU) for different performance requirements
excellent monitoring concept for shredding process
maximum throughput rates
quick uptime after maintenance and improved on-the-job safety during maintenance
lower specific fuel consumption and reduced noise emissions
optionally available as a wheeled semi-trailer (SA), with trailer chassis (A) or track-mounted chassis (K) with different discharge conveyor lengths (4.9 and 7 m)